Roller Sliding Door System

Products we offer in the Roller Sliding Door System range – 

Bottom Rail – holds the door in place. Used in conjunction with the rollers & bottom track.

Bottom Track – The bottom track makes it easy to put the sliding glass door system into any cabinet. This section is screwed into the unit to create a track for the rollers and door. 

Chrome Finger Pull – Don’t forget your handle system! Add the chrome finger pull to your roller door system to ensure you can easily open and close your doors. Requires a 22mm hole. 

End Cap – fits onto the end of the bottom rail to finish the aluminium section neatly.

Glazing Vinyl – This holds the door in place at the bottom of the rail to ensure there is no movement within the panel. Suits a 6mm glass panel or 6.38 laminated glass panel. 

Rollers – these allow for smooth opening and closing of your glass doors. They need to be evenly spaced to carry the weight of the door. 2 rollers are required per square meter of glass.

Top Glass Guide – used to guide the door/glass panel through the top section of the track. Requires 2 guides per standard size. Doors require 3 guides, and any doors over 600mm wide will require additional guides.

Top Guide – holds the door in place for the roller sliding door track.

Universal Lock – Ensure the goods kept in your display are safe by adding a universal lock. These can be installed both on the left or right hand side. This high quality lock is a pin locking system designed to be installed onto the bottom rail in the roller system. 

Not the right options for you?

No problem! We have an extensive range of aluminium extrusions and other shopfitting and display solutions, so you’re sure to find what you’re looking for at ADS! Other extrusion options we offer are slatwall t extrusions, 90 degree corner extrusions, sail track banner extrusions, U channel extrusions and more! Explore the full range here. Or, if you’re looking for a different product, view the full range here. From cable and rod display systems and slatwall panels to mesh dump bins and queue stands, we’ve got everything you could need. However, if you can’t find the perfect solution in our products, we also offer a number of custom solutions – learn more about them here. 

Take a look through our other extrusion options – 

Smart Fix

Smart Fix is an incredible hidden fixing system. Smart Fix is designed for easy installation of vertical mounted items such as panels, artwork, mirrors and more. At only 5mm thick, once installed, you’ll barely know it’s there! Smart Fix comes with pre-drilled 5mm holes every 100mm to ensure effortless installation.

90 Degree Corner Extrusion

The 90 degree corner extrusion neatly finishes corner joins or display ends to provide a sleek and simple display. 

Angle Extrusion Face and Reverse Trim

The Angle Extrusion Face and Reverse Trim is a simple and stylish extrusion that can be used to neatly conceal exposed corners and edges of a display.

Sail Track Banner Extrusion

Hang signs and banners easily with sail track banner extrusions! Simply screw the aluminium to the desired wall and slide the rope through the track, and you have your display area ready!

U Channel Extrusion

U Channel Extrusions offer a neat and clean finish to your panels while adding extra strength to the edges.

Explore our range of project galleries to gain inspiration for your next project!

Not sure where to start?

If you’re not too sure about what roller sliding door system or elements you’ll need, or if you’re after some more information on aluminium extrusions or shopfitting solutions, don’t hesitate to contact our lovely team at Advanced Display Systems. You can contact us via phone on (07) 3861 8888, or via email at info@advdis.com.au.